Marantz CD6004 CD Player Owners Instruction Manual

The Marantz CD6004 is a high-performance CD player featuring advanced audio technology, high-quality DAC (Digital-to-Analog Converter), multiple audio outputs, remote control operation, and premium build quality. Designed for audiophiles seeking exceptional sound reproduction from CDs and CD-R/RW media. Below are key sections covering features, installation, operation, maintenance, and technical specifications.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Audio Systems 7. Playing CDs 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-precision transport mechanism, Cirrus Logic CS4398 DAC, Analog outputs, Digital outputs, Remote control, Display panel with track information.

Feature	Description
Transport Mechanism	High-precision CD loading and reading system
DAC	Cirrus Logic CS4398 24-bit/192kHz DAC
Analog Outputs	RCA stereo outputs for amplifier connection
Digital Outputs	Coaxial and optical digital outputs
Remote Control	Full-function remote for all operations
Display	LED display showing track and time information
Power Supply	High-quality toroidal transformer
Supported Media	CD, CD-R, CD-RW
Playback Modes	Normal, Repeat, Random, Program
Build Quality	Anti-resonance chassis construction

Installation

Unpack and inspect contents. Place on stable, level surface away from heat sources and vibration.

Connect to amplifier: Use high-quality RCA cables from analog outputs to amplifier inputs.
Digital connections: Connect coaxial or optical output to compatible receivers/processors.
Power connection: Plug into AC power outlet (check local voltage requirements).
Remote setup: Install batteries in remote control.

WARNING! Ensure proper ventilation; do not block ventilation openings. Use stable surface to prevent tipping.

First-Time Setup

Power on CD player; initialize system for first use.

Power connection: Connect to appropriate AC power source.
Audio connections: Connect to amplifier using high-quality interconnects.
Display settings: Adjust display brightness if needed via front panel.
Remote operation: Point remote at front panel sensor within 6 meters.
Test playback: Insert CD and verify proper operation.

CAUTION! Allow unit to reach room temperature before operation if moved from cold environment.

Specifications

Frequency Response: 2Hz - 20kHz (±0.3dB)
Signal-to-Noise Ratio: 110dB
Dynamic Range: 100dB
Total Harmonic Distortion: 0.002%
Output Level: 2.0V RMS
Digital Outputs: Coaxial, Optical (24-bit/192kHz capable)
Power Consumption: 18W
Dimensions: 440mm × 105mm × 345mm (W×H×D)
Weight: 7.5kg
Power Requirements: AC 120V, 60Hz (US model)

Controls and Settings

Front Panel: POWER, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, DISPLAY, REPEAT, RANDOM.

Remote Control: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, REPEAT, RANDOM, PROGRAM, DISPLAY, MUTE.

Playback Modes: Normal (sequential play), Repeat (track/disc/all), Random (shuffle play), Program (custom play sequence). Display: Shows track number, elapsed time, remaining time, program information.

Connecting to Audio Systems

Analog connection: RCA outputs to amplifier CD input. Digital connection: Coaxial/optical to compatible digital input.

Turn off all equipment before making connections.
Use high-quality cables for optimal sound quality.
Ensure secure connections; avoid bending cables sharply.
Keep audio cables away from power cords to reduce interference.

Tip: For best audio performance, use high-quality interconnects and keep cable runs as short as possible.

Playing CDs

Supports standard audio CDs, CD-R, and CD-RW media.

Insert disc: Press OPEN/CLOSE, place CD label-side up in tray.
Close tray: Press OPEN/CLOSE or PLAY to close and begin playback.
Basic controls: PLAY, PAUSE, STOP, SKIP (forward/backward).
Track selection: Use numeric buttons or SKIP to select tracks.
Repeat play: Press REPEAT for track/disc/all repeat modes.
Random play: Press RANDOM for shuffle playback.
Program play: Use PROGRAM button to create custom play sequences.
Display information: Press DISPLAY to cycle through time information.

WARNING! Do not move player during disc playback. Handle CDs by edges only.

Advanced Features

High-quality DAC: 24-bit/192kHz processing for superior sound quality. Custom programming: Store up to 32 tracks in memory. Display dimming: Adjust display brightness for critical listening. Direct mode: Bypass unnecessary circuitry for pure audio signal path.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Clean laser lens only with approved CD lens cleaner.

CAUTION! Never use solvents or abrasive cleaners. Avoid magnetic fields near the unit.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European compliance. RoHS compliant. Manufactured under ISO 9001 quality standards. Copyright © Marantz. For support, visit www.marantz.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord disconnected	Check power connection; ensure outlet is live.
No sound	Incorrect connections/mute	Verify amplifier connections; check mute settings.
Disc not reading	Dirty/damaged disc	Clean disc; check for scratches; try different CD.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line of sight.
Skip or hesitation	Dirty lens/disc issues	Clean laser lens with approved cleaner; check disc quality.

Reset: Unplug unit for 30 seconds, then reconnect if experiencing operational issues.

Service: Contact authorized Marantz service center; www.marantz.com