Marantz CD5000 Manual

The Marantz CD5000 is a high-quality CD player featuring advanced digital-to-analog conversion, remote control operation, programmable playback, repeat functions, and digital optical output. Designed for audiophile listening with precision engineering and superior sound quality. Below are key sections for features, installation, operation, specifications, and troubleshooting.

1. Features at a Glance 2. Installation 3. Basic Operation 4. Specifications 5. Controls and Functions 6. Connecting to Audio Systems 7. Advanced Playback Features 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-precision CD mechanism, Remote Control, Digital optical output, Analog audio outputs, Headphone jack, Programmable memory.

Feature	Description
Digital optical output	For connection to digital receivers/processors
Analog audio outputs	RCA jacks for stereo audio connection
Headphone jack	For private listening with volume control
AC power input	For power connection
Remote sensor	Infrared receiver for remote control operation
OPEN/CLOSE	Ejects and closes CD tray
PLAY/PAUSE	Starts and pauses playback
STOP	Stops playback
SKIP	Advances to next track or returns to previous
DISPLAY	Shows track time and playback information

Installation

Unpack and inspect contents. Place on stable, level surface.

Connect to audio system: Use analog RCA cables to amplifier/receiver inputs.
Digital connection: Use optical cable for digital audio output (optional).
Connect headphones: Plug into front panel headphone jack for private listening.
Plug into AC power outlet.

WARNING! Avoid placing near heat sources or in direct sunlight. Ensure proper ventilation around unit.

Basic Operation

Power on CD player; insert CD and begin playback.

Insert CD: Press OPEN/CLOSE, place CD label side up, close tray.
Play CD: Press PLAY; player reads TOC and begins playback.
Adjust volume: Use volume control for headphone output.
Skip tracks: Use SKIP buttons to navigate between tracks.
Pause playback: Press PAUSE to temporarily stop playback.

CAUTION! Handle CDs by edges only. Keep discs clean and free from scratches.

Specifications

Supported formats: Audio CD, CD-R, CD-RW
Frequency response: 20Hz - 20kHz
Signal-to-noise ratio: >100dB
Total harmonic distortion: <0.005%
Outputs: Analog stereo, Digital optical, Headphone
Power consumption: 15W
Power requirements: 120V AC, 60Hz
Dimensions: 17.3" W × 4.1" H × 12.6" D
Weight: 11.2 lbs

Controls and Functions

Front panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP, SKIP, DISPLAY, HEADPHONE jack with volume control.

Remote control: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, REPEAT, PROGRAM, RANDOM, DISPLAY.

Playback modes: Normal play, Program play (up to 20 tracks), Random play, Repeat (track/disc). Display shows: Track number, elapsed time, remaining time, total tracks.

Connecting to Audio Systems

Analog connection: Use stereo RCA cables to amplifier AUX or CD inputs. Digital connection: Optical cable to digital input on receiver.

Turn off all components before connecting.
Match cable colors (red/white for analog audio).
Ensure optical cable is firmly seated in both units.
Select correct input on amplifier/receiver.

Tip: Use high-quality cables for best audio performance.

Advanced Playback Features

Programmable playback: Create custom play sequences. Repeat functions: Track or entire disc repeat.

Program play: Press PROGRAM, select tracks in desired order using numeric buttons.
Random play: Press RANDOM for shuffled track order.
Repeat: Press REPEAT once for track repeat, twice for disc repeat.
Search: Press and hold SKIP for fast forward/rewind within track.
Time display: Press DISPLAY to cycle through time display modes.

NOTE: Program memory is cleared when power is disconnected or CD is changed.

Maintenance

Keep unit clean and free from dust. Use soft, dry cloth for cleaning.

CAUTION! Do not use chemical cleaners or solvents. Unplug unit before cleaning.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord disconnected	Check power connection; ensure outlet is live.
No sound	Incorrect input selection	Select correct input on amplifier; check cable connections.
CD won't play	Disc dirty/damaged	Clean disc; check for scratches; try different CD.
Remote not working	Batteries/obstruction	Replace batteries; ensure clear path to sensor.
Skip or hesitation	Dirty lens	Use CD lens cleaner; avoid vibration near player.

Reset: Unplug unit for 30 seconds, then reconnect.

Service: Contact authorized Marantz service center for repairs.