Marantz CD17 Manual

The Marantz CD17 is a high-end CD player featuring advanced digital-to-analog conversion technology, gold-plated connectors, remote control operation, optical and coaxial digital outputs, and premium audio components for superior sound quality. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: High-quality CD transport mechanism, Digital-to-Analog Converter (DAC), Remote Control, Gold-plated RCA outputs, Optical and Coaxial digital outputs, Headphone jack.

Feature	Description
CD transport mechanism	Precision laser pickup for accurate CD reading
Digital-to-Analog Converter	High-resolution 24-bit/192kHz DAC for superior sound
Gold-plated RCA outputs	For high-quality analog audio connection
Optical digital output	TOSLINK connection for digital audio
Coaxial digital output	RCA connection for digital audio
Headphone jack	For private audio listening
AC input connector	For power connection
OPEN/CLOSE	Ejects disc from tray
PLAY/PAUSE	Starts and pauses CD playback
POWER	Turns CD player on/off

Installation

Unpack and inspect contents. Place on stable, vibration-free surface.

1. Connect audio outputs: Use gold-plated RCA cables to connect to amplifier/receiver.
2. Connect digital outputs: Use optical or coaxial cable for digital connection to compatible devices.
3. Connect headphones: Plug into front panel headphone jack for private listening.
4. Plug into AC power using supplied power cord.

WARNING! Handle with care; avoid placing near heat sources or magnetic fields.

First-Time Setup

Power on CD player; follow initial setup procedure.

1. Load CD: Press OPEN/CLOSE, place CD in tray, close tray.
2. Select output: Choose analog RCA or digital output via front panel or remote.
3. Adjust audio settings: Use menu for digital filter settings and output level.
4. Set display options: Configure track/time display preferences.

CAUTION! Ensure proper ventilation; allow space around unit for heat dissipation.

Specifications

• Supported Formats: Audio CD, CD-R, CD-RW
• Frequency Response: 2Hz - 20kHz (±0.5dB)
• Signal-to-Noise Ratio: >110dB
• Total Harmonic Distortion: <0.002%
• Digital Outputs: Optical, Coaxial
• Analog Outputs: Gold-plated RCA (L/R)
• Headphone Output: Standard 3.5mm jack
• Power Consumption: 15W
• Dimensions: 440mm x 315mm x 105mm (WxDxH)
• Weight: 7.5kg

Controls and Settings

Front Panel: POWER, OPEN/CLOSE, PLAY/PAUSE, STOP, SKIP (PREV/NEXT), DISPLAY.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, REPEAT, RANDOM, DISPLAY.

Audio Settings: Digital filter (Fast/Slow roll-off), Output level (Fixed/Variable). Display: Track/time information, Dimmer control. System: Factory reset, Firmware version.

Connecting Devices

Audio System: RCA outputs to amplifier/receiver. Digital System: Optical/coaxial to compatible DAC or receiver. Headphones: Direct to front panel jack.

1. Turn off all devices before connecting.
2. Use high-quality cables for optimal performance.
3. Match output selection to connected system (analog/digital).

Tip: Use gold-plated connectors for best audio quality.

Playing CD Media

Supports standard audio CDs, CD-R, and CD-RW discs.

1. Insert disc: Press OPEN/CLOSE, load CD properly in tray.
2. Play: Press PLAY; unit reads TOC and begins playback.
3. Navigate: Use SKIP buttons for track selection; numeric buttons for direct access.
4. Pause: Press PAUSE to temporarily halt playback.
5. Stop: Press STOP; unit remembers last position with resume function.
6. Repeat: Press REPEAT for track/all repeat modes.
7. Random: Press RANDOM for shuffle playback.
8. Search: Use fast forward/rewind during playback.

WARNING! Do not touch laser lens; keep discs clean and free of scratches.

Advanced Features

Digital Filter Selection: Choose between fast and slow roll-off filters for different sound characteristics. Variable Output: Adjust output level when connected directly to power amplifier. Display Dimmer: Control front panel brightness for low-light environments.

Care & Cleaning

Unplug before cleaning. Use soft, dry cloth for exterior; CD lens cleaner for optical pickup.

CAUTION! Do not use solvents or abrasive cleaners; avoid static discharge.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Marantz; all rights reserved. For support, visit www.marantz.com or contact authorized Marantz service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Connections/input selection	Check cable connections; verify amplifier input selection.
Disc not recognized	Disc damage/format	Clean disc; ensure compatible CD format; try different disc.
Remote not working	Batteries/obstacles	Replace batteries; ensure line of sight to IR sensor.
Skip or hesitation	Disc quality/vibration	Use quality discs; ensure stable placement away from vibration.
No power	Power cord/outlet	Check power connection; try different outlet.

Reset: Disconnect power for 30 seconds then reconnect.

Service: Contact authorized Marantz service center; www.marantz.com