Marantz CD-63SE Manual

The Marantz CD-63SE is a high-performance CD player featuring advanced digital-to-analog conversion, high-quality audio components, remote control operation, multiple output options, and precision disc playback capabilities. Below are key sections for safety, features, installation, operation, specifications, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Audio Systems 7. Playing CDs 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-precision CD mechanism, Digital-to-Analog Converter, Remote Control, Audio outputs, Display panel, Transport controls.

Feature	Description
CD mechanism	High-precision laser pickup for accurate disc reading
Digital-to-Analog Converter	High-quality DAC for superior audio reproduction
Remote control	Full-function remote for all operations
Audio outputs	RCA analog outputs for connection to amplifiers
Display panel	LED display showing track and time information
Transport controls	Play, pause, stop, skip, and search functions
Power supply	Stabilized power supply for clean audio performance
Headphone output	3.5mm jack for private listening
Program memory	Store up to 20 tracks for programmed playback
Repeat functions	Track, program, and all-disc repeat modes

Installation

Unpack and inspect contents. Place on stable, level surface away from heat sources.

Connect audio outputs: Use high-quality RCA cables to connect to amplifier or receiver.
Connect power: Plug into appropriate AC power outlet.
Connect headphones: Use 3.5mm jack for private listening.
Position unit: Ensure adequate ventilation around the unit.

WARNING! Do not place near heat sources or in direct sunlight. Ensure proper ventilation.

First-Time Setup

Power on CD player; initialize system.

Power connection: Connect to AC power source.
Audio connection: Connect to amplifier using RCA cables.
Insert disc: Load a CD to test operation.
Remote setup: Install batteries in remote control.
Display check: Verify display shows proper information.

CAUTION! Handle discs carefully; avoid touching playing surface.

Specifications

Disc compatibility: Audio CD, CD-R, CD-RW
Frequency response: 2Hz - 20kHz
Signal-to-noise ratio: >100dB
Total harmonic distortion: <0.002%
Output level: 2.0V RMS
Digital outputs: Coaxial and optical (where applicable)
Analog outputs: RCA stereo
Power consumption: 15W
Dimensions: 440mm x 315mm x 105mm (W x D x H)
Weight: 5.5kg

Controls and Settings

Front panel controls: POWER, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, DISPLAY.

Remote control: POWER, Numeric buttons, OPEN/CLOSE, PLAY, PAUSE, STOP, SKIP, REPEAT, PROGRAM, RANDOM, DISPLAY.

Display functions: Track number, elapsed time, remaining time, program information. Playback modes: Normal, Program, Random, Repeat. Audio settings: Digital filter selection, output level adjustment.

Connecting to Audio Systems

Audio outputs: RCA analog outputs for connection to amplifiers and receivers.

Turn off all equipment before making connections.
Connect RCA cables from CD player outputs to amplifier inputs.
Match left/right channels (white/red connectors).
For digital connection: Use coaxial or optical cable if available.
Power on amplifier first, then CD player.

Tip: Use high-quality cables for best audio performance.

Playing CDs

Supports standard audio CDs, CD-R, and CD-RW discs.

Insert disc: Press OPEN/CLOSE, place CD label side up.
Close tray: Press OPEN/CLOSE or PLAY to close tray.
Play: Press PLAY; unit reads TOC and begins playback.
Skip tracks: Use SKIP buttons to navigate tracks.
Pause: Press PAUSE to temporarily stop playback.
Stop: Press STOP to end playback.
Search: Press and hold SKIP for fast forward/reverse.
Eject: Press OPEN/CLOSE to remove disc.

WARNING! Do not move unit during playback. Keep discs clean and free of scratches.

Advanced Features

Program play: Store up to 20 tracks in desired order. Random play: Play tracks in random order. Repeat: Repeat track, program, or entire disc. Time search: Locate specific time position on disc. Display modes: Track time, remaining time, total time.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Clean lens only with approved CD lens cleaner.

CAUTION! Never use solvents or abrasive cleaners. Avoid extreme temperatures and humidity.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord disconnected	Check power connection; ensure outlet is live.
No sound	Incorrect connections	Check audio cables; verify amplifier settings.
Disc not recognized	Dirty/damaged disc	Clean disc; check for scratches; try different CD.
Skip or mistracking	Dirty lens	Use approved CD lens cleaner; avoid vibrations.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear path to sensor.

Reset: Unplug unit for 30 seconds, then reconnect.

Service: Contact authorized Marantz service center for repairs.