Marantz CD 6000 User Manual

The Marantz CD 6000 is a high-quality CD player featuring advanced digital-to-analog conversion, multiple audio outputs, remote control operation, programmable playback, repeat functions, and digital filter options. Designed for audiophiles seeking superior sound quality with features like HDAM circuitry, copper-plated chassis, and gold-plated connectors. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Audio Systems 7. Playing CDs 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-precision transport mechanism, HDAM circuitry, Digital filter, Remote control, Analog outputs, Digital outputs.

Feature	Description
HDAM circuitry	Marantz Hyper Dynamic Amplifier Module for superior sound
Digital filter	Selectable digital filter modes for different sound characteristics
Analog outputs	RCA left/right audio outputs
Digital outputs	Coaxial and optical digital outputs
Programmable playback	Store up to 20 tracks in memory
Repeat functions	Track, disc, and program repeat modes
Display dimmer	Adjustable display brightness
Remote control	Full-function remote for all operations
Copper-plated chassis	Reduces electromagnetic interference
Gold-plated connectors	Corrosion-resistant for better signal transfer

Installation

Unpack and inspect contents. Place on stable, level surface.

Connect to amplifier: Use high-quality audio cables to connect analog outputs to amplifier inputs.
Connect digital outputs: Use coaxial or optical cable to connect to compatible receivers.
Power connection: Plug into AC power outlet.
Remote control: Insert batteries into remote control.

WARNING! Ensure proper ventilation around unit. Do not place near heat sources or in direct sunlight.

First-Time Setup

Power on CD player; initialize system.

Display settings: Adjust display brightness using DIMMER button.
Digital filter: Select preferred filter mode (1 or 2) for sound characteristics.
Output level: Set fixed or variable output level as needed.
Remote control: Point remote at front panel sensor for operation.

CAUTION! Allow unit to reach room temperature before operation if moved from cold environment.

Specifications

Frequency Response: 2Hz - 20kHz
Signal-to-Noise Ratio: >100dB
Dynamic Range: >100dB
Total Harmonic Distortion: <0.002%
Output Level: 2.0V RMS
Digital Outputs: Coaxial, Optical
Power Consumption: 15W
Dimensions: 440mm x 105mm x 315mm (W x H x D)
Weight: 5.5kg
Power Requirements: 120V AC, 60Hz

Controls and Settings

Front Panel: POWER, OPEN/CLOSE, PLAY, STOP, PAUSE, SKIP, DISPLAY, DIMMER.

Remote Control: POWER, Numeric buttons, OPEN/CLOSE, PLAY, STOP, PAUSE, SKIP, PROGRAM, REPEAT, RANDOM, DISPLAY, DIMMER.

Basic Operations: Play, pause, stop, skip tracks, open/close disc tray. Advanced Functions: Program play (store up to 20 tracks), Repeat (track/disc/program), Random play, Display modes (track/time remaining), Digital filter selection.

Connecting to Audio Systems

Analog Connection: Use RCA cables to connect to amplifier/receiver. Digital Connection: Use coaxial or optical cable for digital signal.

Turn off all equipment before making connections.
Use high-quality cables for best performance.
Match cable colors (red-right, white-left) for analog connections.
Ensure digital cables are firmly seated.

Tip: Keep audio cables away from power cords to reduce interference.

Playing CDs

Supports audio CDs, CD-R, CD-RW.

Insert disc: Press OPEN/CLOSE, place CD label side up.
Play: Press PLAY; unit reads TOC and begins playback.
Skip tracks: Use SKIP buttons to move between tracks.
Pause: Press PAUSE to temporarily stop playback.
Stop: Press STOP to end playback.
Eject: Press OPEN/CLOSE to remove disc.
Display: Press DISPLAY to cycle through track/time information.

WARNING! Do not touch laser lens. Keep discs clean and free of scratches.

Advanced Features

Program Play: Store up to 20 tracks in memory for custom playback order. Repeat Modes: Track repeat, disc repeat, program repeat. Random Play: Shuffles track order for varied listening. Digital Filter: Two selectable filter modes for different sound characteristics.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Use CD cleaning disc periodically for lens maintenance.

CAUTION! Do not use solvents or abrasive cleaners. Avoid extreme temperatures and humidity.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Marantz; all rights reserved. For support, visit www.marantz.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord disconnected	Check power connection; ensure outlet is working
Disc won't play	Disc dirty/damaged	Clean disc; check for scratches; try different disc
No sound	Incorrect connections	Check audio cables; verify amplifier settings
Remote not working	Batteries/obstructions	Replace batteries; ensure line of sight to sensor
Skip or hesitation	Disc quality	Clean disc; check for damage; use quality media

Reset: Unplug unit for 30 seconds, then reconnect.

Service: Contact authorized Marantz service center for repairs.