Marantz AV 8801 Manual

The Marantz AV 8801 is a premium 11.2-channel AV preamplifier/processor featuring advanced audio processing, extensive connectivity options, and sophisticated room correction technology. This high-end component supports the latest audio formats including Dolby Atmos and DTS:X, offers comprehensive networking capabilities, and provides exceptional audio performance for home theater enthusiasts. Below are key sections covering setup, operation, features, and troubleshooting.

Features at a Glance

Key components: 11.2-channel processing, Audyssey MultEQ XT32 room correction, Dolby Atmos/DTS:X support, extensive connectivity options, network streaming capabilities.

Feature	Description
Audio Channels	11.2-channel processing capability
Room Correction	Audyssey MultEQ XT32 with Sub EQ HT	Audio Formats	Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master Audio
HDMI Inputs	8 inputs, 2 outputs with 4K/60Hz pass-through
Network Connectivity	Ethernet, Wi-Fi, Bluetooth
Streaming Services	AirPlay, Spotify Connect, internet radio
Analog Inputs	7.1 multi-channel, stereo RCA, balanced XLR
Digital Inputs	Coaxial, optical, USB, Ethernet
Zone Outputs	Zone 2 and Zone 3 pre-outs
Control Systems	RS-232C, IP control, IR input

Installation

Unpack and inspect contents. Place in well-ventilated area with adequate clearance.

1. Connect power: Use supplied power cord to AC outlet.
2. Connect speakers: Use high-quality speaker cables to external amplifiers.
3. Connect source devices: Use HDMI cables for digital sources, analog cables for legacy devices.
4. Connect network: Use Ethernet cable or configure Wi-Fi for network access.
5. Connect control system: Use RS-232 or IP for integration with home automation.

WARNING! Ensure proper ventilation; do not block ventilation openings. Use stable surface to prevent tipping.

First-Time Setup

Power on unit; follow on-screen setup wizard.

1. Language selection: Choose preferred menu language.
2. Speaker configuration: Set number and size of speakers.
3. Audyssey calibration: Run automatic room correction with included microphone.
4. Input assignment: Configure HDMI and analog inputs for connected sources.
5. Network setup: Connect to home network for streaming services.
6. Zone configuration: Set up multi-room audio if required.

CAUTION! Use proper speaker impedance matching. Ensure all connections are secure before powering on.

Specifications

• Audio Channels: 11.2-channel processing
• Frequency Response: 10Hz - 100kHz (+1/-3dB)
• Signal-to-Noise Ratio: 110dB (IHF-A)
• Total Harmonic Distortion: 0.005% (20Hz-20kHz)
• HDMI: 8 inputs, 2 outputs, 4K/60Hz, HDR, Dolby Vision
• Network: Ethernet, Wi-Fi, Bluetooth
• Power Consumption: 45W (operating), 0.3W (standby)
• Dimensions: 17.3" W × 6.8" H × 17.5" D
• Weight: 28.7 lbs (13.0 kg)

Controls and Settings

Front Panel: POWER, INPUT SELECT, VOLUME, MENU, navigation buttons. Remote Control: Complete control of all functions.

Main Menu Categories: Input Setup, Audio Settings, Video Settings, Network Settings, System Setup, Zone Setup.

Audio Settings: Speaker configuration, crossover settings, distance settings, level calibration, Audyssey settings, tone controls. Video Settings: HDMI setup, video mode, resolution output. Network Settings: Network connection, streaming services, firmware updates. System Setup: General settings, remote control setup, trigger outputs.

Connecting Devices

HDMI: Primary connection for modern sources. Analog: For legacy components. Network: For streaming and control.

1. Turn off all devices before making connections.
2. Use high-quality HDMI cables for digital sources.
3. Connect analog sources to appropriate RCA or XLR inputs.
4. Assign inputs in setup menu for proper source identification.
5. Connect network via Ethernet or configure Wi-Fi.

Tip: Use HDMI Control (CEC) for simplified system operation with compatible devices.

Network Setup

Wired or wireless connection for streaming and control.

1. Wired: Connect Ethernet cable to router and AV 8801.
2. Wireless: Access network settings, select Wi-Fi network, enter password.
3. Streaming services: Access music services through network menu.
4. Firmware updates: Check for updates in system menu.
5. Control apps: Use Marantz remote app for iOS/Android.

Note: Wired connection recommended for best streaming performance and stability.

Audio Calibration

Audyssey MultEQ XT32 room correction system.

1. Place included microphone at primary listening position.
2. Access Audyssey setup in menu system.
3. Follow on-screen prompts for multiple measurement positions.
4. Review and save calibration results.
5. Adjust settings manually if desired (crossover, levels, distances).

Important: Maintain quiet environment during calibration measurements for accurate results.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior surfaces.

CAUTION! Do not use liquid cleaners or aerosols. Avoid moisture exposure. Keep ventilation openings clear of dust and obstructions.

Regulatory Information

FCC compliant: Class B digital device. CE marked for European compliance. RoHS compliant. Manufactured under license from Dolby Laboratories. DTS and DTS-HD are registered trademarks. For technical support, visit www.marantz.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound output	Input selection/volume	Check input selection; verify volume level; confirm amplifier connections.
No video through HDMI	HDMI connection/settings	Verify HDMI cable connections; check video output settings; try different input.
Network connection failed	Network settings/cables	Check Ethernet cable; verify Wi-Fi password; restart router.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line of sight to IR sensor.
Audyssey calibration fails	Microphone/environment	Check microphone connection; reduce ambient noise; reposition microphone.

Reset: System > Reset to restore factory defaults if needed.

Service: Contact authorized Marantz service center for repairs.