Marantz AV 600 Owners Manual

The Marantz AV 600 is a high-performance audio/video receiver featuring Dolby Digital and DTS decoding, multiple audio/video inputs, digital optical and coaxial connections, multi-room capability, advanced surround sound processing, and intuitive remote control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio/Video Setup 8. Multi-Room Operation 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dolby Digital/DTS decoder, multi-zone capability, digital inputs, remote control, speaker terminals, video switching.

Feature	Description
Dolby Digital/DTS Decoder	5.1 channel surround sound processing
Multi-Zone Capability	Independent audio in second room
Digital Inputs	Optical and coaxial digital audio connections
Video Switching	Composite and S-Video input/output switching
Speaker Terminals	5.1 channel speaker connections
Remote Control	Learning remote with macro functions
Tone Controls	Bass, treble, and balance adjustments
Input Selector	Multiple source selection
Volume Control	Master volume with on-screen display
Power Switch	Main power on/off control

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Use speaker wire to connect front, center, surround speakers.
Connect audio sources: Use analog RCA or digital optical/coaxial inputs.
Connect video sources: Use composite or S-Video inputs for video devices.
Connect to TV: Use audio/video outputs to television.
Plug into AC power.

WARNING! Ensure proper ventilation; do not block cooling vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow on-screen setup guide.

Speaker configuration: Set speaker sizes and distances in setup menu.
Input assignment: Assign inputs to specific sources (DVD, CD, etc.).
Surround mode: Select preferred surround sound mode.
Volume calibration: Use test tone for proper speaker levels.
Remote programming: Program remote for other devices.

CAUTION! Disconnect power before making connections. Follow polarity for speaker wiring.

Specifications

Audio Formats: Dolby Digital, DTS, Dolby Pro Logic II
Power Output: 80W x 5 channels (8 ohms, 20Hz-20kHz)
Inputs: 4 analog audio, 2 digital optical, 1 coaxial, 3 composite video
Outputs: 5.1 channel preamp, composite video, second zone audio
Frequency Response: 20Hz-20kHz (+/- 0.5dB)
Signal-to-Noise: 100dB (line level)
Dimensions: 17.1" W x 5.6" H x 15.4" D
Weight: 22 lbs
Power Consumption: 500W maximum

Controls and Settings

Front Panel: Power, Input Selector, Volume, Headphone Jack, Display Dimmer.

Remote: Power, Input Select, Volume, Mute, Surround Mode, Number Pad, Menu Navigation.

Audio Settings: Bass, Treble, Balance, Speaker Levels, Distance Settings. Video Settings: Input Assignment, Output Resolution. System Settings: Remote Codes, Auto Standby, Display Settings.

Connecting Devices

Audio Sources: CD player, turntable, tape deck. Video Sources: DVD player, cable box, gaming console.

Turn off all devices before connecting.
Use appropriate cables for each source type.
Assign inputs in receiver setup menu.
Connect speakers observing proper polarity.
Connect subwoofer using LFE or line output.

Tip: Use high-quality cables for best performance. Keep audio and video cables separated.

Audio/Video Setup

Optimize receiver for your specific room and equipment.

Speaker configuration: Set size (large/small) and crossover frequency.
Distance calibration: Input distance from listening position to each speaker.
Level calibration: Use built-in test tone and SPL meter for accurate levels.
Surround mode selection: Choose appropriate mode for content type.
Input naming: Customize input labels for easy identification.
Video setup: Configure video output resolution and aspect ratio.

WARNING! Do not exceed recommended power levels. Match speaker impedance requirements.

Multi-Room Operation

Second zone audio capability for whole-house sound.

Connect second zone speakers to designated terminals.
Select second zone source using remote or front panel.
Adjust second zone volume independently.
Use remote extender for IR control in second room.

Note: Second zone operates in stereo mode only. Source selection limited to analog inputs.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep vents clear of dust.

CAUTION! Do not use liquid cleaners. Avoid extreme temperatures and humidity.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European compliance. Copyright © Marantz America, Inc. Dolby and DTS are registered trademarks. For support, visit www.marantz.com or contact 1-800-270-2744.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/volume	Check input selection; adjust volume; verify speaker connections.
No video	Input/cable issues	Verify input selection; check video cables; ensure TV is on correct input.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear path to IR sensor; check remote mode.
No surround sound	Source/format	Ensure source provides digital signal; select appropriate surround mode.
Overheating	Ventilation	Ensure adequate ventilation; check for blocked vents; reduce volume if excessive.

Reset: Press and hold Tone and Surround buttons while powering on for factory reset.

Service: 1-800-270-2744; www.marantz.com