marantz av 600 owners manual pdf

The Marantz AV 600 is a high-performance audio/video receiver featuring Dolby Digital and DTS decoding, multiple audio/video inputs, digital signal processing, surround sound capabilities, remote control operation, and advanced audio calibration. This comprehensive manual covers setup, operation, and troubleshooting for optimal home theater performance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Audio/Video Operation 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Dolby Digital/DTS decoder, multiple audio/video inputs, digital optical/coaxial inputs, surround sound processing, remote control, front panel controls.

Feature	Description
Dolby Digital Decoder	5.1 channel surround sound processing
DTS Decoder	Digital Theater Systems compatibility
Audio Inputs	Multiple analog and digital inputs
Video Inputs	Composite and S-Video connections
Digital Inputs	Optical and coaxial digital audio
Surround Modes	Multiple DSP surround sound modes
Remote Control	Full-function remote with learning capability
Front Panel Display	LCD display with status indicators
Power Output	High-current amplifier section
Bass Management	Adjustable crossover settings

Installation

Unpack and inspect all components. Place unit in well-ventilated area.

Connect speakers: Match impedance and power handling requirements.
Connect audio sources: Use appropriate analog/digital inputs for each source.
Connect video sources: Route through AV 600 for video switching.
Connect subwoofer: Use dedicated subwoofer output.
Plug into AC power.

WARNING! Ensure proper ventilation; do not block cooling vents. Use correct speaker wire gauge.

First-Time Setup

Power on unit; run initial setup procedure.

Speaker configuration: Set speaker sizes and distances.
Input assignment: Assign sources to specific inputs.
Surround mode selection: Choose preferred DSP modes.
Calibration: Use built-in test tones for level matching.
Remote programming: Set up remote for system control.

CAUTION! Disconnect power before making connections. Follow impedance guidelines.

Specifications

Power Output: 100W per channel (8 ohms)
Frequency Response: 20Hz-20kHz (±0.5dB)
Signal-to-Noise: >100dB
Total Harmonic Distortion: <0.05%
Inputs: 6 analog audio, 3 digital (2 optical, 1 coaxial)
Outputs: 5.1 channel preamp, subwoofer, tape monitor
Video: 4 composite, 2 S-Video
Dimensions: 17.3" W × 6.3" H × 15.7" D
Weight: 22 lbs
Power Requirements: 120V AC, 60Hz

Controls and Settings

Front panel: POWER, INPUT SELECT, VOLUME, SURROUND MODE, MUTE. Remote: Full system control with input selection, volume, surround modes, setup menu access.

Menu System: Access via SETUP button. Speaker setup, input configuration, surround parameters, tone controls, system preferences. Surround Modes: Dolby Digital, DTS, Pro Logic, Hall, Theater, Stadium. Audio Settings: Bass, Treble, Balance, Loudness, Night Mode.

Connecting Devices

Audio Sources: CD player, tape deck, turntable (with phono preamp). Video Sources: DVD player, cable/satellite box, gaming console. Digital Sources: Connect via optical or coaxial digital inputs.

Turn off all components before connecting.
Use high-quality cables for best performance.
Match input types (analog to analog, digital to digital).
Assign inputs in setup menu for proper source selection.

Tip: Keep digital cables away from power cords to prevent interference.

Audio/Video Operation

Basic operation: Select input source, adjust volume, choose surround mode.

Power on: Press POWER button on front panel or remote.
Select source: Use INPUT SELECT or remote input buttons.
Adjust volume: Use VOLUME control or remote.
Select surround mode: Choose from available DSP modes.
Mute audio: Press MUTE for temporary silence.
Tape monitoring: Use TAPE MONITOR for recording.
Headphone use: Connect headphones to front panel jack.

WARNING! Avoid excessive volume levels that could damage speakers or hearing.

Advanced Features

Digital Signal Processing: Multiple surround sound modes and effects. Bass Management: Adjustable crossover frequencies. Remote Learning: Program remote to control other components. Night Mode: Dynamic range compression for late-night viewing.

Care & Maintenance

Unplug unit before cleaning. Use soft, dry cloth for exterior. Keep unit free from dust and moisture. Ensure proper ventilation around unit.

CAUTION! Do not use liquid cleaners. Avoid blocking ventilation openings. Service by qualified personnel only.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Check power connection; try different outlet; check fuse.
No sound	Input selection/volume	Verify input selection; check volume level; ensure mute off.
No surround sound	Source/decoder settings	Check source material; verify surround mode selection.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear path to IR sensor.
Distorted sound	Source/connections	Check source quality; verify all connections secure.

Reset: Disconnect power for 30 seconds to reset microprocessor.

Service: Contact authorized Marantz service center for repairs.