Marantz 8200 Manual

The Marantz 8200 is a high-performance audio receiver featuring Dolby Digital and DTS decoding, multiple audio inputs, digital signal processing, remote control, multi-room audio capability, and advanced audio adjustments. Designed for home theater enthusiasts, it delivers exceptional sound quality with power output of 100W per channel, THX certification, and comprehensive connectivity options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Dolby Digital/DTS decoder, multi-zone audio, remote control, multiple audio/video inputs, digital optical/coaxial inputs, speaker terminals.

Feature	Description
Power Output	100W per channel (8 ohms, 20Hz-20kHz)
Audio Decoding	Dolby Digital, DTS, Dolby Pro Logic II
Inputs	6 analog audio, 3 digital optical, 2 digital coaxial
Outputs	7.1 channel pre-outs, multi-room audio
Video Inputs	3 composite video, 2 component video
THX Certification	THX Select certified for home theater
Multi-room	Zone 2 audio output with independent source
Remote Control	Learning remote with backlight
Setup Assistant	Auto speaker calibration and setup
Display	Fluorescent display with dimmer control

Installation

Unpack and inspect contents. Place in well-ventilated area.

1. Connect speakers: Use speaker wire to connect front, center, surround, and subwoofer channels.
2. Connect audio sources: Use analog or digital inputs for CD player, turntable, etc.
3. Connect video sources: Use composite or component inputs for DVD player, gaming console.
4. Connect to TV: Use audio outputs to TV or monitor.
5. Plug into AC power.

WARNING! Ensure proper ventilation; do not block vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow on-screen setup assistant.

1. Auto speaker setup: Use included microphone for automatic calibration.
2. Set speaker configuration: Specify small/large speakers and crossover frequencies.
3. Configure inputs: Assign sources to input buttons.
4. Set audio preferences: Choose decoding modes and sound fields.
5. Multi-room setup: Configure Zone 2 if needed.

CAUTION! Ensure all connections are secure before powering on.

Specifications

• Power Output: 100W x 7 (8 ohms, 20Hz-20kHz, 0.08% THD)
• Frequency Response: 10Hz-100kHz (+1, -3dB)
• Signal-to-Noise: 100dB (line input)
• Total Harmonic Distortion: 0.08% (rated power)
• Input Sensitivity: 200mV (line), 650mV (surround)
• Digital Inputs: 3 optical, 2 coaxial
• Analog Inputs: 6 stereo pairs
• Video Inputs: 3 composite, 2 component
• Power Consumption: 650W maximum
• Dimensions: 17.3" W x 6.4" H x 16.1" D
• Weight: 28.7 lbs

Controls and Settings

Front Panel: POWER, INPUT SELECT, VOLUME, TONE, MUTE, HEADPHONE.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, TONE, SETUP, numeric buttons.

Audio Settings: Bass, Treble, Balance, Loudness, Surround Modes (Dolby Digital, DTS, Stereo). Video Settings: Component video switching, OSD setup. System Settings: Speaker configuration, input assignment, multi-room control. Setup: Auto calibration, manual speaker setup, firmware updates.

Connecting Devices

Audio Sources: CD player, turntable, tape deck. Video Sources: DVD player, gaming console, cable box.

1. Turn off receiver and devices before connecting.
2. Match cable types to inputs (analog/digital).
3. Use high-quality cables for best performance.
4. Assign inputs via SETUP menu.
5. Select input via front panel or remote.

Tip: Use digital connections for best audio quality from digital sources.

Audio Configuration

Supports multiple surround formats and audio processing.

1. Select surround mode: Dolby Digital, DTS, Stereo, Direct.
2. Adjust speaker levels: Use test tone and manual adjustments.
3. Set crossover: 80Hz recommended for small speakers.
4. Configure subwoofer: LFE mode or main+sub.
5. Sound fields: Hall, Theater, Stadium presets.
6. Tone controls: Adjust bass and treble to preference.
7. Loudness: Compensates for low-volume listening.

WARNING! Avoid extreme volume levels to prevent speaker damage.

Multi-Room Setup

Zone 2 audio: Second room audio with independent source selection.

1. Connect Zone 2 speakers to dedicated terminals.
2. Enable Zone 2 in setup menu.
3. Select Zone 2 source independently from main zone.
3. Control volume separately for each zone.

Note: Zone 2 supports analog sources only.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; avoid chemicals.

Keep unit free from dust and moisture. Ensure proper ventilation.

CAUTION! Do not use liquid cleaners; keep away from heat sources.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE marked for European market. Copyright © Marantz America, Inc. Dolby and DTS are registered trademarks. For support, visit www.marantz.com or contact 1-800-270-2878.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/speaker wires	Check input selection; verify speaker connections; ensure volume up.
No video	Input/cable issues	Verify input selection; check video cables; try different input.
Remote not working	Batteries/obstructions	Replace batteries; ensure line of sight to IR sensor.
Overheating	Ventilation blocked	Ensure adequate ventilation; clear vents of dust.
No surround sound	Source/format issues	Check source format; ensure proper surround mode selected.

Reset: Press and hold TONE and SURROUND MODE while powering on.

Service: 1-800-270-2878; www.marantz.com