Marantz 8004 CD Player Owners Instruction Manual

The Marantz 8004 is a high-performance CD player featuring advanced digital-to-analog conversion, high-quality audio components, remote control operation, multiple output options, and precision disc playback capabilities. Designed for audiophiles seeking superior sound quality with features like HDAM circuitry, digital filters, and robust construction. Below are key sections for safety, features, installation, setup, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Audio Systems 7. Playing CDs 8. Advanced Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-precision transport mechanism, HDAM circuitry, Digital filters, Remote Control, Analog outputs, Digital outputs, Headphone jack.

Feature	Description
Transport mechanism	High-precision disc loading and reading system
HDAM circuitry	Marantz Hyper Dynamic Amplifier Module for superior sound
Digital filters	Selectable filter characteristics for different listening preferences
Analog outputs	RCA and XLR balanced outputs for maximum compatibility
Digital outputs	Coaxial and optical digital outputs
Headphone jack	Front panel 1/4" headphone output with volume control
Display	High-contrast fluorescent display showing track and time information
Remote control	Full-function remote for complete system control
Construction	Heavy-duty chassis with vibration damping
Power supply	High-quality toroidal transformer for clean power

Installation

Unpack and inspect contents. Place on stable, level surface away from heat sources and vibration.

Choose location: Stable surface with adequate ventilation around unit.
Connect to amplifier: Use high-quality RCA cables for analog connections.
Digital connections: Connect coaxial or optical output to compatible receivers.
Power connection: Plug into AC power outlet matching voltage requirements.
Antenna connection: For remote control operation, ensure clear line of sight.

WARNING! Unit contains sensitive optical components; handle with care during installation.

First-Time Setup

Power on CD player; initialize system for first use.

Power connection: Connect to appropriate AC power source.
System connections: Ensure proper connection to amplifier or receiver.
Remote setup: Install batteries in remote control.
Initial play: Insert CD and verify proper operation.
Display settings: Adjust display brightness if needed.

CAUTION! Allow unit to reach room temperature before first use if transported in cold conditions.

Specifications

Disc Compatibility: CD, CD-R, CD-RW
Frequency Response: 2Hz - 20kHz (±0.3dB)
Signal-to-Noise Ratio: >115dB
Dynamic Range: >100dB
Total Harmonic Distortion: <0.001%
Output Level: 2.0V RMS
Digital Output: Coaxial, Optical
Analog Output: RCA, XLR balanced
Power Consumption: 25W
Dimensions: 440mm × 385mm × 125mm (W×D×H)
Weight: 12.5kg

Controls and Settings

Front Panel: POWER, OPEN/CLOSE, PLAY, STOP, PAUSE, SKIP, DISPLAY, HEADPHONE jack with volume.

Remote: POWER, Numeric buttons, OPEN/CLOSE, PLAY, STOP, PAUSE, SKIP, REPEAT, RANDOM, DISPLAY, MENU.

Settings: Digital filter selection (Filter 1, Filter 2, Filter 3), Display brightness, Output level adjustment, Headphone volume control, Repeat modes (Track, All, A-B), Playback modes (Normal, Random).

Connecting to Audio Systems

Analog outputs: RCA or XLR to amplifier inputs. Digital outputs: Coaxial or optical to compatible receivers.

Turn off all equipment before making connections.
Use high-quality cables for best audio performance.
Match output type to amplifier input capabilities.
Ensure secure connections to prevent signal loss.
Verify proper operation after connections complete.

Tip: For best sound quality, use balanced XLR connections when available.

Playing CDs

Supports standard audio CDs, CD-R, and CD-RW media.

Insert disc: Press OPEN/CLOSE, place CD label side up.
Play: Press PLAY; unit reads TOC and begins playback.
Navigation: Use SKIP buttons for track selection.
Pause: Press PAUSE to temporarily halt playback.
Stop: Press STOP to end playback.
Repeat: Press REPEAT for track or disc repeat.
Random: Press RANDOM for shuffled playback.
Display: Press DISPLAY to cycle through available information.

WARNING! Do not move unit during disc playback. Handle discs by edges only.

Advanced Features

Digital Filter Selection: Choose between Filter 1 (standard), Filter 2 (slow roll-off), Filter 3 (fast roll-off). Custom Display: Adjust brightness and information displayed. Headphone Amplifier: High-quality headphone output with independent volume control.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Use lens cleaning discs periodically for optical system.

CAUTION! Never use solvents or abrasive cleaners. Keep unit free from dust and moisture.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. CE compliant for European markets. Copyright © Marantz. For support, visit www.marantz.com or contact authorized service centers. Serial number located on rear panel for service reference.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord disconnected	Check power connection; ensure outlet functioning
Disc not reading	Dirty lens/damaged disc	Clean lens with proper cleaner; check disc for damage
No sound	Incorrect connections	Verify audio cable connections; check amplifier settings
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line of sight to sensor
Skip or hesitation	Dirty/damaged disc	Clean disc; check for scratches; try different disc
Display dim or off	Display settings	Adjust display brightness in settings menu

Reset: Disconnect power for 30 seconds then reconnect.

Service: Contact authorized Marantz service center; www.marantz.com