Marantz 6011 Owners Manual

The Marantz 6011 is a high-performance AV receiver featuring 9.2 channel processing, 4K Ultra HD video pass-through, built-in Wi-Fi and Bluetooth, AirPlay 2, HEOS multi-room audio, Audyssey room calibration, and support for Dolby Atmos and DTS:X. Below are key sections for setup, features, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Network Setup 8. Audio Calibration 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 9.2 channel amplifier, HDMI inputs/outputs, network connectivity, remote control, Audyssey microphone, speaker terminals.

Feature	Description
HDMI Inputs	8 HDMI inputs with 4K/60Hz pass-through
Network Connectivity	Built-in Wi-Fi and Ethernet for streaming
Bluetooth	Wireless audio streaming capability
HEOS Multi-room	Multi-room audio system integration
Audyssey Room Correction	Automatic speaker calibration
Dolby Atmos/DTS:X	Immersive 3D audio format support
Zone 2 Output	Second zone audio capability
Phono Input	Dedicated turntable connection
Pre-out Connections	External amplifier connections
Remote Control	Full-featured system control

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Use appropriate gauge speaker wire for all channels.
Connect source devices: Use HDMI cables for best quality connections.
Connect TV: Use HDMI OUT (MAIN) to TV HDMI input.
Connect network: Use Ethernet cable or setup Wi-Fi.
Plug into AC power.

WARNING! Ensure adequate ventilation; do not block air vents. Use proper speaker impedance.

First-Time Setup

Power on receiver; follow on-screen setup wizard.

Connect Audyssey microphone: Plug into front panel MIC jack.
Run Audyssey setup: Follow on-screen instructions for speaker calibration.
Set network connection: Configure Wi-Fi or Ethernet connection.
Configure inputs: Assign source names to HDMI inputs.
Set audio preferences: Configure surround modes and audio processing.

CAUTION! Keep microphone away from noise sources during calibration.

Specifications

Amplifier Section: 9.2 channels, 110W per channel (8 ohms, 20Hz-20kHz)
Audio Formats: Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master Audio
Video Support: 4K/60Hz, HDR10, Dolby Vision, HLG
Connectivity: 8 HDMI inputs, 3 HDMI outputs, Ethernet, Wi-Fi, Bluetooth
Streaming Services: Spotify, Pandora, Tidal, Amazon Music
Room Correction: Audyssey MultEQ XT32
Power Consumption: 680W maximum, 65W standby
Dimensions: 17.3" W x 6.8" H x 15.7" D
Weight: 26.5 lbs

Controls and Settings

Access menu system via front panel or remote control. Front Panel: POWER, INPUT SELECT, VOLUME, SETUP, TONE CONTROL.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SETUP, SOUND MODE, ZONE 2, CURSOR buttons.

Audio Settings: Speaker configuration, crossover settings, distance settings, level calibration. Video Settings: Resolution output, HDMI settings, video mode. Network Settings: Wi-Fi setup, firmware updates, streaming services. System Settings: GUI language, auto standby, IR control.

Connecting Devices

HDMI: Connect source devices to HDMI inputs. Speakers: Connect to appropriate channel terminals. Network: Ethernet or Wi-Fi connection.

Turn off receiver and devices before connecting.
Use high-speed HDMI cables for 4K devices.
Connect speakers observing proper polarity.
Select input via INPUT SELECT on remote or front panel.

Tip: Use banana plugs for secure speaker connections.

Network Setup

Supports wired and wireless network connections.

Wired connection: Connect Ethernet cable to network port.
Wireless setup: Access network settings in menu, select Wi-Fi network.
Streaming services: Login to Spotify, Pandora, etc. through HEOS app.
Firmware updates: Check for updates in system menu.
HEOS multi-room: Add additional HEOS compatible speakers.

WARNING! Ensure stable network connection for streaming services.

Audio Calibration

Audyssey MultEQ XT32 room correction system.

Connect microphone: Plug into front panel MIC input.
Position microphone: Use tripod at primary listening position.
Run calibration: Follow on-screen instructions for multiple positions.
Review results: Check speaker levels, distances, and crossover settings.
Manual adjustments: Fine-tune settings as needed.

CAUTION! Maintain silence during calibration measurements.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; avoid liquids. Keep vents clear for proper ventilation.

CAUTION! Do not use chemical cleaners; ensure proper ventilation to prevent overheating.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Marantz America, LLC. For support, visit www.marantz.com or contact 1-800-370-3746. This product incorporates copyright protection technology.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Input selection/volume	Check input selection; ensure volume not muted; verify speaker connections.
No video	HDMI connection	Check HDMI cables; verify TV input selection; try different HDMI input.
Network issues	Connection settings	Check network cables; verify Wi-Fi password; restart router.
Remote not working	Batteries/obstacles	Replace batteries; ensure clear line of sight to receiver.
Overheating	Ventilation	Ensure adequate ventilation; clear vents; reduce volume if necessary.

Reset: Press and hold POWER and SURROUND MODE buttons for 5 seconds.

Service: 1-800-370-3746; www.marantz.com