Marantz 5006 User Manual

The Marantz 5006 is a high-performance AV receiver featuring 7.2 channel surround sound, HDMI connectivity with 4K upscaling, built-in Wi-Fi and Bluetooth, Audyssey room calibration, multi-zone audio capabilities, and support for various audio formats including Dolby Atmos and DTS:X. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Network Setup 8. Audio Calibration 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.2 channel amplifier, HDMI inputs/outputs, Network connectivity, Front panel display, Remote control, Speaker terminals.

Feature	Description
HDMI Inputs	6 HDMI inputs with 4K upscaling and HDCP 2.2 support
Network Connectivity	Built-in Wi-Fi and Ethernet for streaming services
Bluetooth	Wireless audio streaming from compatible devices
Audyssey Room Correction	Automatic speaker calibration for optimal sound
Multi-zone Audio	Second zone audio output for whole-home audio
Speaker Terminals	7-channel binding posts for speaker connections
Front Panel USB	For connecting USB storage devices
Phono Input	Dedicated input for turntable connection
Zone 2 Output	Independent audio output for second room
Remote Control	Full-function remote with backlit buttons

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Use appropriate gauge speaker wire for each channel.
Connect source devices: Use HDMI cables for modern devices; analog for legacy equipment.
Connect subwoofer: Use RCA cable for LFE/subwoofer output.
Connect network: Use Ethernet cable or configure Wi-Fi during setup.
Plug into AC power.

WARNING! Ensure adequate ventilation; do not block air vents. Use proper speaker wire gauge.

First-Time Setup

Power on receiver; follow on-screen setup wizard.

Run Audyssey calibration: Connect included microphone and follow prompts.
Configure inputs: Assign names and settings to each input source.
Set network connection: Connect via Wi-Fi or Ethernet for streaming services.
Configure audio settings: Set speaker sizes, distances, and crossover frequencies.
Update firmware: Check for and install latest firmware updates.

CAUTION! Keep magnetic objects away from speakers during setup.

Specifications

Amplifier Section: 7.2 channels, 100W per channel (8 ohms, 20Hz-20kHz)
Audio Formats: Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master Audio
Video Support: 4K/60p pass-through, 4K upscaling, HDR10, Dolby Vision
Connectivity: 6 HDMI inputs, 2 HDMI outputs, Ethernet, Wi-Fi, Bluetooth
Inputs/Outputs: Phono, analog audio, digital optical/coaxial, Zone 2 pre-out
Room Correction: Audyssey MultEQ XT
Streaming Services: Spotify Connect, AirPlay 2, Tidal, Deezer
Power Consumption: 600W maximum, 65W standby
Dimensions: 17.3" W x 6.4" H x 15.7" D
Weight: 22.5 lbs

Controls and Settings

Access settings via front panel or remote control. Front Panel: POWER, INPUT SELECT, VOLUME, SETUP, TONE CONTROL.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SETUP, AUDIO, TONE, ZONE 2.

Audio Settings: Speaker configuration, distance, level, crossover, Audyssey settings. Video Settings: Resolution, HDMI setup, video mode. Network Settings: Wi-Fi setup, firmware update, streaming services. System Settings: Input assignment, zone setup, remote control setup.

Connecting Devices

HDMI: Primary connection for modern AV components. Analog: For legacy devices and turntable. Network: Ethernet or Wi-Fi for streaming.

Turn off receiver and devices before connecting.
Use high-speed HDMI cables for 4K content.
Connect turntable to PHONO input with proper ground connection.
Select input via INPUT SELECT button or remote.

Tip: Label cables for easy identification during setup.

Network Setup

Supports wired and wireless network connections for streaming and control.

Wired connection: Connect Ethernet cable to router and receiver.
Wireless connection: Access network setup in menu, select Wi-Fi network, enter password.
Streaming services: Access via HEOS app or front panel interface.
Firmware updates: Check for updates in system menu when connected.
Mobile control: Download Marantz AVR Remote app for smartphone control.

WARNING! Ensure stable internet connection for streaming services.

Audio Calibration

Audyssey MultEQ XT room correction system for optimal sound quality.

Connect calibration microphone to front panel MIC input.
Position microphone at primary listening position.
Follow on-screen instructions for multiple measurement positions.
System automatically calculates speaker distances, levels, and EQ settings.
Save calibration results and make manual adjustments if desired.

CAUTION! Maintain silence during calibration measurements.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior; compressed air for vents.

CAUTION! Do not use liquid cleaners; avoid moisture near electrical components.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2024 Sound United LLC; Marantz is a registered trademark. For support, visit www.marantz.com or contact 1-800-370-3744.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from speakers	Speaker wires/input selection	Check speaker connections; verify input source; ensure volume not muted.
No video output	HDMI connection/settings	Check HDMI cable connections; verify input assignment; try different HDMI port.
Network connection issues	Wi-Fi signal/router	Check network credentials; move closer to router; try wired connection.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line of sight to receiver IR sensor.
Overheating	Ventilation/placement	Ensure adequate ventilation; clear vents of dust; check ambient temperature.

Reset: Press and hold INFO and BACK buttons simultaneously for 5 seconds.

Service: 1-800-370-3744; www.marantz.com