marantz 4200 manual

The Marantz 4200 is a high-performance audio/video receiver featuring Dolby Digital and DTS decoding, multi-room audio capabilities, AM/FM tuner with 40 presets, multiple audio/video inputs, digital optical and coaxial inputs, speaker A/B switching, and advanced surround sound processing. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Main unit with built-in amplifier, Remote Control, AM/FM antenna terminals, multiple audio/video inputs, digital inputs, speaker terminals, multi-room outputs.

Feature	Description
Power Output	100 watts per channel (8 ohms, 20Hz-20kHz)
Audio Decoding	Dolby Digital, DTS, Dolby Pro Logic II
Tuner	AM/FM with 40 station presets
Audio Inputs	6 analog audio inputs
Video Inputs	4 composite video, 2 S-Video
Digital Inputs	2 optical, 2 coaxial
Multi-room	Zone 2 audio output
Speaker Outputs	A/B switching for main speakers
Headphone Jack	Front panel 1/4" stereo jack
Remote Control	Learning remote with macro functions

Installation

Unpack and inspect contents. Place in well-ventilated area.

1. Connect speakers: Match polarity (+/-) to speaker terminals.
2. Connect audio sources: Use appropriate audio inputs (CD, DVD, Tape, etc.).
3. Connect video sources: Use composite or S-Video inputs as needed.
4. Connect antennas: AM loop and FM wire antennas included.
5. Plug into AC power.

WARNING! Ensure proper ventilation; do not block cooling vents. Use correct speaker impedance.

First-Time Setup

Power on receiver; follow on-screen display or front panel indicators.

1. Speaker setup: Configure speaker size and distance in menu.
2. Tuner setup: Auto-scan for AM/FM stations and store presets.
3. Input assignment: Assign digital inputs to specific sources.
4. Surround setup: Select appropriate surround mode for each input.
5. Remote setup: Program learning remote for other devices.

CAUTION! Ensure all connections are secure before powering on.

Specifications

• Power Output: 100W x 5 (8 ohms, 20Hz-20kHz)
• Frequency Response: 20Hz-20kHz (+0/-0.5dB)
• Total Harmonic Distortion: 0.05% (20Hz-20kHz)
• Signal-to-Noise Ratio: 100dB (line level)
• Input Sensitivity: 200mV (line), 2.5mV (MM phono)
• Digital Inputs: 2 optical, 2 coaxial
• Video Inputs: 4 composite, 2 S-Video
• Audio Inputs: 6 analog including phono
• Power Consumption: 450W maximum
• Dimensions: 17-1/8" W x 6-3/4" H x 15-3/4" D

Controls and Settings

Access menu system via front panel or remote control. Front Panel: POWER, VOLUME, INPUT SELECT, TUNER PRESETS, SURROUND MODE.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SURROUND MODE, TUNER PRESETS, numeric buttons, SETUP MENU.

Audio Settings: Bass, Treble, Balance, Loudness, Tone Defeat. Surround Settings: Dolby Digital, DTS, Dolby Pro Logic II, Hall, Stadium. Speaker Settings: Size (Large/Small), Distance, Level Calibration. Tuner Settings: Auto-scan, Manual tuning, Preset memory. System Settings: Input rename, Digital input assign, Remote setup.

Connecting Devices

Audio Sources: CD player, turntable, tape deck, etc. Video Sources: DVD player, VCR, cable box, etc.

1. Turn off receiver and devices before connecting.
2. Match audio cables to appropriate inputs (CD, DVD, etc.).
3. Connect digital sources to optical or coaxial inputs.
4. Connect video sources to composite or S-Video inputs.
5. Select input via INPUT SELECTOR on front panel or remote.

Tip: Use high-quality cables for best audio/video performance.

Audio/Video Operation

Supports various audio formats and surround modes.

1. Source selection: Press INPUT SELECTOR to choose source.
2. Volume control: Use VOLUME knob or remote buttons.
3. Surround mode: Select appropriate mode for content.
4. Tuner operation: Tune stations and store presets.
5. Tone controls: Adjust bass/treble as needed.
6. Mute function: Press MUTE for temporary silence.
7. Headphone use: Plug into front panel jack for private listening.
8. Speaker selection: Choose A, B, or A+B for main speakers.

WARNING! Do not operate at maximum volume for extended periods.

Multi-Room Features

Zone 2 audio output for second room listening.

1. Connect speakers to Zone 2 terminals.
2. Select Zone 2 source from main unit or remote.
3. Control Zone 2 volume independently.
4. Different sources can play in main room and Zone 2.

Note: Zone 2 operates in stereo mode only.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth only; no liquids or chemical cleaners.

CAUTION! Keep away from moisture and extreme temperatures. Ensure proper ventilation.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © Marantz America, Inc. All rights reserved. For support, visit www.marantz.com or contact authorized service centers.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound	Speaker connections/mute	Check speaker wires; ensure mute is off; verify input selection.
No power	Power cord/outlet	Check power cord connection; test outlet; check fuse.
Poor FM reception	Antenna placement	Reposition FM antenna; ensure proper connection.
Remote not working	Batteries/obstacles	Replace batteries; ensure clear path to IR sensor.
No digital sound	Input assignment	Verify digital input assignment in menu; check cable connections.
Overheating	Ventilation	Ensure adequate ventilation; clear vents of obstructions.

Reset: Disconnect power for 5 minutes, then reconnect.

Service: Contact authorized Marantz service center; www.marantz.com