Marantz 2110 Owners Manual

The Marantz 2110 is a high-performance stereo receiver featuring advanced audio technology, multiple input/output options, and premium build quality. This manual covers essential information for setup, operation, and maintenance of your Marantz 2110 receiver, including specifications, connections, controls, and troubleshooting guidance.

Features at a Glance

Key components: High-power amplifier section, precision tuner, multiple audio inputs, remote control capability, and premium construction.

Installation

Unpack and inspect all components. Place receiver on stable, well-ventilated surface.

1. Connect speakers: Use speaker wire to connect left and right speakers to appropriate terminals.
2. Connect audio sources: Use RCA cables to connect turntable, CD player, or other audio sources.
3. Connect antenna: Attach FM antenna for radio reception.
4. Plug into AC power outlet.

WARNING! Ensure proper ventilation around receiver. Do not block ventilation openings.

First-Time Setup

Power on receiver and configure initial settings.

1. Set input source: Rotate input selector to desired source (PHONO, CD, AUX, TUNER).
2. Tuner setup: Extend FM antenna fully for best reception.
3. Volume adjustment: Start with volume at minimum and gradually increase.
4. Tone controls: Set bass and treble to neutral position initially.

CAUTION! Ensure speakers are properly connected before powering on.

Specifications

• Power Output: High-fidelity stereo power amplification
• Tuner Section: AM/FM stereo reception
• Frequency Response: Wide frequency range for accurate reproduction
• Total Harmonic Distortion: Low distortion for clean audio
• Input Sensitivity: Optimized for various source levels
• Inputs: Multiple audio inputs including PHONO, CD, AUX
• Outputs: Speaker outputs, headphone jack
• Power Requirements: Standard AC power operation
• Dimensions: Standard component dimensions

Controls and Settings

Front panel controls: POWER, INPUT SELECTOR, VOLUME, BASS, TREBLE, BALANCE, TUNER CONTROLS.

Remote Control: POWER, VOLUME, MUTE, INPUT SELECTION, TUNER PRESETS.

Audio Controls: Bass adjustment, treble adjustment, balance control, loudness compensation. Tuner: Manual tuning, preset stations, stereo/mono selection. Input Selection: PHONO, CD, AUX, TUNER sources.

Connecting Devices

Audio Sources: PHONO for turntable, CD for CD player, AUX for additional sources. Speakers: Standard speaker terminals.

1. Turn off receiver before making connections.
2. Match cable colors to appropriate terminals.
3. Ensure secure connections for optimal performance.
4. Select appropriate input source for connected device.

Tip: Use quality cables for best audio performance.

Audio Operation

Supports various audio sources including turntable, CD player, and auxiliary inputs.

1. Select source: Rotate input selector to appropriate position.
2. Adjust volume: Start low and increase to desired level.
3. Tone adjustment: Use bass and treble controls to suit listening preference.
4. Tuner operation: Tune to desired station using tuning dial.
5. Preset stations: Store favorite stations for quick access.
6. Headphone use: Plug headphones into front panel jack for private listening.

WARNING! Avoid excessive volume levels to prevent hearing damage.

Advanced Features

Loudness Control: Compensates for Fletcher-Munson curves at low volumes. Tone Defeat: Bypasses tone controls for pure signal path. Speaker Selection: Multiple speaker outputs if equipped.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep away from moisture and extreme temperatures.

CAUTION! Do not use liquid cleaners. Avoid abrasive materials that may damage finish.

Regulatory Information

Complies with applicable safety and electromagnetic compatibility standards. Manufactured to Marantz quality standards. For technical support and service, contact authorized Marantz service centers.

Troubleshooting

Reset: Power cycle unit if experiencing issues.

Service: Contact authorized Marantz service center for technical support.