Marantz 1601 User Manual

The Marantz 1601 is a high-performance AV receiver featuring 7.1 channel surround sound, HDMI connectivity, network streaming capabilities, advanced audio decoding formats, multi-zone audio, and intuitive setup wizard. With 80 watts per channel, built-in Bluetooth and Wi-Fi, Audyssey room calibration, and compatibility with 4K video pass-through, this receiver delivers exceptional home theater performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Network and Streaming 8. Audio Calibration 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 7.1 channel amplifier, HDMI inputs/outputs, Network connectivity, Bluetooth/Wi-Fi, Audyssey calibration microphone, Remote control, Multi-zone audio outputs.

Feature	Description
HDMI Inputs	6 HDMI inputs with 4K/60Hz pass-through
Network Connectivity	Built-in Wi-Fi and Ethernet for streaming services
Bluetooth	Wireless audio streaming from compatible devices
Audyssey MultEQ	Room acoustic calibration system
Multi-zone Audio	Zone 2 audio output for second room
Power Output	80 watts per channel (8 ohms, 20Hz-20kHz)
Audio Formats	Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master Audio
Setup Wizard	On-screen guided setup process
Remote Control	Learning remote with backlit buttons
Display	Front panel display with dimmer control

Installation

Unpack and inspect contents. Place in well-ventilated area.

Connect speakers: Use appropriate gauge speaker wire for each channel.
Connect HDMI devices: Connect sources to HDMI inputs, output to TV/projector.
Connect network: Use Ethernet cable or configure Wi-Fi during setup.
Connect subwoofer: Use RCA cable to LFE input.
Plug into AC power.

WARNING! Ensure adequate ventilation; do not block cooling vents. Use proper speaker impedance.

First-Time Setup

Power on receiver; follow on-screen setup wizard.

Connect Audyssey microphone: Plug into SETUP MIC port on front panel.
Run Audyssey calibration: Follow on-screen prompts for measurement positions.
Configure network: Select Wi-Fi or Ethernet, enter credentials.
Set speaker configuration: Verify speaker sizes and distances.
Configure inputs: Assign sources to HDMI inputs.

CAUTION! Keep microphone away from noise sources during calibration.

Specifications

Power Output: 80W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)
HDMI: 6 inputs, 2 outputs (Main + Zone 2)
Audio Decoding: Dolby Atmos, DTS:X, Dolby TrueHD, DTS-HD Master Audio
Network: Wi-Fi (2.4GHz/5GHz), Ethernet, Bluetooth
Streaming Services: Spotify Connect, AirPlay 2, Tidal, Deezer
Inputs/Outputs: 6 HDMI, 3 digital audio, 6 analog audio, phono input
Multi-zone: Zone 2 line output
Power Consumption: 450W maximum, 0.5W standby
Dimensions: 17.3" W × 6.3" H × 14.1" D
Weight: 22 lbs

Controls and Settings

Access OSD via SETUP button. Front Panel: POWER, INPUT SELECT, VOLUME, SETUP, TONE CONTROL.

Remote: POWER, INPUT SELECT, VOLUME, MUTE, SETUP, SOUND MODE, ZONE 2, NETWORK.

Audio Settings: Speaker configuration, crossover, distance, level calibration. Video Settings: HDMI setup, resolution, color space. Network Settings: Wi-Fi/Ethernet configuration, streaming services. System Settings: Firmware update, remote control setup, display brightness.

Connecting Devices

HDMI: Connect sources to HDMI inputs 1-6. Analog: Use analog audio inputs for legacy devices. Network: Ethernet or Wi-Fi for streaming.

Turn off receiver and devices before connecting.
Use high-speed HDMI cables for 4K content.
Assign inputs in setup menu for easy selection.
Connect turntable to PHONO input with proper grounding.

Tip: Label cables for easy identification during setup.

Network and Streaming

Supports streaming services and network audio.

Network setup: Configure Wi-Fi or connect Ethernet cable.
Streaming services: Access via NETWORK button, select service.
Bluetooth: Pair compatible devices in Bluetooth setup menu.
AirPlay 2: Stream from Apple devices on same network.
Multi-room audio: Configure Zone 2 for second room playback.
Firmware updates: Check for updates in system menu.

WARNING! Ensure stable network connection for optimal streaming performance.

Audio Calibration

Audyssey MultEQ room correction system.

Connect calibration microphone to front panel SETUP MIC port.
Position microphone at primary listening position.
Follow on-screen instructions for additional measurement positions.
System calculates optimal speaker settings, distances, and levels.
Manual adjustments available for advanced users.

CAUTION! Maintain quiet environment during calibration measurements.

Care & Maintenance

Unplug before cleaning. Use soft, dry cloth for exterior. Keep vents clear of dust.

CAUTION! Do not use liquid cleaners. Avoid moisture near ventilation openings.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2024 Sound United, LLC; Marantz is a registered trademark. For support, visit www.marantz.com or contact 1-800-370-3744.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No sound from speakers	Speaker wires/input selection	Check speaker connections; verify input source; check volume level.
No video output	HDMI connection/settings	Ensure HDMI cable connected; check input assignment; verify TV input.
Network connection issues	Wi-Fi signal/credentials	Check network settings; verify password; restart router.
Bluetooth pairing failed	Distance/interference	Move devices closer; eliminate interference; restart pairing process.
Overheating	Ventilation blockage	Ensure adequate ventilation; clear vents; reduce volume if necessary.

Reset: Press and hold STATUS and ENTER while powering on for factory reset.

Service: 1-800-370-3744; www.marantz.com